Here is the roof and windsheild frame all done, its all made from 1/2" conduit.

Here is where the roof connects to the windshield frame.

Here is a closer view of the roof frame.

Here are the back two braces for the roof.

Here is the back brace for the roof.

Here is a picture of the roof and windshield frame from the back of the hover.

Here is the piece of glass that we will be using for the center of the windsheild. The outside curved parts will be 1/16" thick lexan.

Here are a couple of pictures of the windsheild with the lexan in.

Go back to my main UH-18sp page.