Here is our radiator, its from a escort, it is a little bit bigger than what the plans called for but it was free.

The bottom of the radiator is bolted to some angle iron that is bolted to the engine and we used the rubber mounts from the escort so the radiator wouldn't get shook apart form the vibration, its not tightend down all the way yet, thats why its leaning forwards a little.

here are a couple pictures of the radiator hoses.

We got the shape of the hoses we needed buy bending a coat hanger to the correct shape and then we brought the coat hanger to Auto Zone and we looked for hoses that we could put together to match the shape. Then we connected the hoses with 1" water pipe. Go back to my main UH-18sp page.