Here is the front of the hovercraft primered. We used Dutchboy Exterior enamel oil based primer and Dutchboy Exterior enamel old based paint.

Here we have one coat of blue in the cockpit and on the racing strips, one coat of yellow on the walls and 2 coats of yellow on the nose and dash

Here we have both coats of yellow and blue on. To get the racing strips to look right I put 2" wide painters tape down the center and then went out to where I wanded to out side of the strips to be and I put down 1" wide tape then I painted the yellow. After I had both coats of yellow on I taped off the yellow and painted the blue, it worked pretty good. We just used rollers and a paint brush to paint the entire hover.

Here we have all of the painting done except for the deck and the thrust duct.

Here is the roof with both coats of yellow and blue, its ready to be put on.

Here is the roof screwed on.

.

Here is the lift guard put on.