Here is the cable coming out of the side of the seat.

Here is the pulley that the steering cable bends around which lines it up with the rudders.

Here is where the cable leaves the cockpit.

Here is the cable running down the deck and two the rudders, we will probably put the cables inside of some 1/2" conduit so we won't trip over them.

Here is where the steering cable connects to the rudders on one side.

Here is the steering cable running down the other side of the deck.

Here is the emergency brake handle that will adjust the variator when we get it. Right now it will just adjust the tension and keep the variator mount from flaping back and forth.

Here is the cable running out of the cockpit. We will put the entire cable in PVC pipe after we paint.

Here is where the cable attaches to the variator mount at the eye bolt.